$ 2,000
Z-axis reinforcement for the A1
Many cutouts have been made to save filament, and 2 walls also provide good strength. Each main body only requires 100g of material. However, some areas have too many cutouts, requiring supports; I was too lazy to change it.
The filament holder I recently made was found to wobble significantly and put considerable pressure on the Z-axis, so I decided to make a reinforcement as well. It needs m3x12 screws to be fixed on the Z-axis, and the bushing screws in the middle should be as long as possible to ensure stability.
The bottom foot pad needs an additional 1mm thick non-slip rubber pad.
Z-axis reinforcement for the A1
Many cutouts have been made to save filament, and 2 walls also provide good strength. Each main body only requires 100g of material. However, some areas have too many cutouts, requiring supports; I was too lazy to change it.
The filament holder I recently made was found to wobble significantly and put considerable pressure on the Z-axis, so I decided to make a reinforcement as well. It needs m3x12 screws to be fixed on the Z-axis, and the bushing screws in the middle should be as long as possible to ensure stability.
The bottom foot pad needs an additional 1mm thick non-slip rubber pad.
New arrivals, maker stories, and exclusive offers right to your inbox.
A global marketplace for handmade and unique goods, connecting you with makers and meaningful finds.
Reviews
There are no reviews yet.